What Do I Do If My Water Well Suddenly Stops Working?
One fine morning you wake up, walk into your bathroom, turn the faucet to drink some water, but to your surprise nothing comes out.
If your supply of water comes from a private well, then it means your well is no longer functioning.
There are many reasons wells stop pumping water, but at that moment, you rely on the power of your water pressure!
If you have a problem with your water well, need to get water back to your home or business before weather turns bad, call the experts at Boylan Water Well Service and Supply for 24 hour emergency well water repair.
Our technicians are experts in determining what caused the system to fail, find the fix that works best for you and repair that system.
If you Fancy Assistance Fixing Your Well Go and read about what we offer!
Well Pump Failure Causes
If you ever find yourself asking, “What happened to my well pump?” there are several reasons the well pump had a hard time and what may contributed to a lack of performance.
Homeowners may make a brief diagnosis themselves as to the problem with a well pump, it might be best to call a professional for resolution.
Equipment Problems
Well pump failure is most often due to equipment issues. There are a lot of moving parts in a water well pump system and any of these, if not working, can cause the pump to breakdown.
The essential components of a modern drilled well system are a submersible pump, a check valve (if not built into the submersible pump), a pitless adaptor, a well cap (an independent contractor may apply an additional charge for installing or replacing the well cap), And electrical wiring, including a control box and pressure switch inside the home. There are also more fittings and shut-off switches for system protection, but that’s the overall idea.
Draining Aquifers and Groundwater Issues
If you have running water when you wake up early in the morning, lose it off and on throughout the day and have water again when you return home from work, it may be a sign you are drawing from a depleting aquifer.
Pumping rate out of the well would HAVE TO be NO GREATER than the recharge rate into the well for the well pump system to operate successfully.
Water availability is unpredictable from one year to the next, but generally if your well is drilled deep enough you shouldn’t experience water loss. A typical well drilled in Florida needs to go at least 200 ft down to the bedrock of the aquifer.
If the well was drilled to water and not any further, then you’re less easily to get a good, solid supply of water out of the aquifer. At Perry’s Pump Repair, your well is drilled all the way to the aquifer bedrock.
Well Pump Wear & Tear
A sub pump made under the best conditions will last for 10-15 years. But depending on the way the well is built, a pump can break far earlier than that. For instance, a well-constructed only of PVC pipe as opposed to steel casing with PVC has an increased probability for failure, especially in the state of Florida.
PVC pipe is fragile and may crack if not surrounded by steel; the PVC pipe can deteriorate rapidly in the soil.
If the water in your location is high in sediment (sand, minerals, etc.), the well pump can wear out more often. A blow to the well, such as striking the well with a vehicle or bit of gravel dropping down the top of the well, may also result in premature well pump failure and the loss of water pressure or even water supply.
We recommend that you perform some form of maintenance during these periods annually, and it is the best way to prevent a road side failure.
How to Know If Your Well Pump Is Failing
If you want to know a little more about what’s going on with your system, we’ll walk you through some steps to help you troubleshoot your well pump system failure.
Check the Power
Look at the well circuit breaker for a short in the system. If your well pump is not working after a thunderstorm, inspect to see if the well was hit by lightning. If there has been a power surge or short in your system, the circuit may have been tripped. To test or replace the fuses, turn the circuit breaker on and off.
Check the Tank Pressure
Locate the pressure gauge on your pressure tank, look at the valve and read the pressure. If it doesn’t display a pressure of 30-50 psi or 40-60 psi, then you have an electric pressure switch problem.
If water pressure is an issue, manually depress the pressure control switch. This should start the pump. If the pump fails to kick in after you close the switch, chances are it’s the pump that’s faulty.
Call Boylan Water Well Service & Supply for Well Pump Repair in Fort Worth
No matter the reason for your well pump’s troubles, you deserve a pro who can have your system back in full force again in no time. And that’s where we come in – Boylan Water Well Service & Supply!
Our experts are well versed in identifying the cause of your well pump emergency and making the recommendation that is both cost effective and well suited for you. If the problem becomes a water pump replacement, rest assured we will NEVER try to sell you something you don’t require!
Have a well pump not working, call Boylan Water Well Service and Supply today!